- Cast Iron for strength
- Cast Aluminum for lighter weight
- Accurate Machined Surfaces
- Tabs and Edge Alignment Pins for a variety of situations
- The Best Square. This product is covered by multiple design and utility patents.
Fireball squares help you get the job done faster and with greater dimensional accuracy. Square it, clamp it, and you're ready to go.
Mega Square
Quickly set your workpiece to 90° or 45° with roomy joint access.
Monster Square
Quickly set your workpiece to 90° or 45° with roomy joint access.
Magic Square
Adjustable angle square that adjusts from 40 to 180 degrees.
Minion Square
Compact configuration for use in tight spaces.
Mutant Square
Quickly set your workpiece to 90° or 45° with roomy joint access.
3-Axis Square
A unique solution to clamping in 3 axis at once.
Combination Square
Largest combination square on the market.
| Aluminum (AL) | Cast Iron (FE) + Dragon Scale |
| Pros
Cons
| Pros
Cons
Fireball’s new Dragon Scale coating provides the corrosion resistance of our previous black oxide finish with the added benefit of enhanced spatter resistance. Its spatter resistance needs to be seen to believed; it out performs even the best weld spatter sprays without the use of any sprays. |
Why do Fireball squares work better than a speed square?
Clamp directly to the Fireball square’s flange
Cannot clamp directly to a speed square
Fireball squares let you control three planes
Speed squares only let you control two planes
Cast material resists weld spatter
Even DIY welding squares don't have the same resistance to weld spatter
Fireball square’s tabs and screws allow for better alignment and more configurations
DIY squares lack these tabs and thumbscrews
Most Fireball square designs allow for easy joint access
The original Mega Square is available in a 300 mm, 200 mm, 150 mm and 100 mm size with two material choices: Dragon Coated Cast Iron (FE) or Cast Aluminum (AL). All Mega Squares feature a stiff “flange and web” design that is fully machined on all outer edges with tapped holes on the sides for mounting tabs.
Roomy joint access for welding, gluing, nailing, riveting, etc.
Tabs help eliminate twisting and warping in the final work-piece.
Clamping is simple with multiple surfaces for quick and rigid attachment.
The original Monster Square is available in a 300 mm, 200 mm, 150 mm and 100 mm size with two material choices: Dragon Coated Cast Iron (FE) or Cast Aluminum (AL). All Monster Squares feature a stiff “flange and web” design that is fully machined on all outer edges with tapped holes on the sides for mounting tabs.
Designed to quickly set your work-piece to 90 or 45 degrees.
Tabs help eliminate twisting and warping in the final work-piece.
Use the radius on the tabs to use the Monster Square as a traditional speed square for layout.
COMBINATION SQUARE
The Fireball Combination Square Blade comes in a unique finish and graduation marking scheme. Our finish is a titanium nitride coating which gives it a gold color that provides great reading contrast. This is the same gold finish used on drill bits which is both extremely durable and scratch resistant.
There are so many ways to use this square it seems like Magic. It’s two squares in one- when you purchase one Magic Square you get two individual squares that also link together to form 5 different combo squares. A zinc adjustable handle provides tool-less angle adjustments
These squares come in a compact configuration for use in tight spaces. Each square measures 150 x 100 x 38 mm, the 100 mm width is perfect for picket spacing on gates and fences. They are the first square we offer which has a built in 60/30 degree angle. The cutout also provides just the right amount of joint access when using it to clamp things at 90 degrees.
Compact Size For Tight Spaces
100 mm Width Perfect For Picket Spacing
Clamp The Angles Together To Create Custom Spacing
3-AXIS SQUARE
- Use the inside or outside faces. 4 machined faces on both the inside and outside of the square.
- No limit on inside face, large 100 mm height limit on outside face,
- Ductile cast iron for tensile strength
- Balanced to sit on its front feet, with additional small magnets on the front feet to resist tipping.
- Feet of the square are 25 mm wide to match our Fireball Fence Block fixture system
- Tapped holes in both feet for installing pins that quickly align the feet with the 50 mm grid pattern of common welding tables
MUTANT SQUARE
- The Mutant Square is 250 x 250 x 50 mm in size.
- Its size slots in between the 200mm Monster Square (200 x 200 x 38 mm) and the 300mm Monster Square (300 x 300 x 78 mm).
- What You Get
- Optional Add Ons
4 Edge Location Tabs
Our revolutionary tabs allow you to align your material up so that you don’t even need a welding table! Don’t spend thousands on a flat table, just use our squares! Tighten the tabs onto the front or back of your square and you can immediately get to work. Sure, there are different jigs out there, but can they line your material perfectly in seconds?
4 Tool-less Thumbscrews
But it doesn’t stop there. We reinvented the game by introducing our thumbscrews. Say goodbye to your hex keys and Allen screwdrivers and freely adjust the tabs with only your fingers!
Edge Alignment Pins
Install our edge alignment pins on any square to create a large, overhanging edge which can be used to index the square on a different plane. Depending on the square, this allows you to create edges which are 90 degrees (perpendicular), 45 degrees, parallel, and even 60 and 30 degrees from the edge.
- Use it with our Monster squares to create a speed square for layout.
- Use it to hang the square off the edge of a table for working vertical or perpendicular to table surface
- Use it to elevate the squares off the ground or table for extra clearance when you’re fitting and welding entire frames
- Tip! If trying to create a parallel edge with the mega square for marking, use our shims to get that perfect distance!