- Coating- Corrosion, spatter, and scratch resistant Dragon Scale
- Ribbing- Full height 100 mm ribbing engineered to torsional rigidity
- Holes- All counterbore and chamfered on back sides
- Side face on the tables are 100 mm tall with 1 row of holes.
- The modular leg accessory system provides an extensive range of customization options.
- 12 mm thick table that shares all the same fixtures as the 25 mm thick table.
- Flatness (± 0.127 mm) full length, corner to corner
Modèle 3D à 360° (cliquer et glisser)
Dragon Wagon - 1350x750 mm
Tabletop Construction
| Tabletop Dimensions | 1350x750 mm |
| Table Side Height | 100 mm |
| Table Thickness | 12 mm |
| Hole Diameter | 19 mm |
| Grid Pattern | 50 mm |
| Material | Gray Cast Iron |
| Finish | Dragon Scale |
| Tabletop Weight | 180 kg |
| Leg Type | Standard Duty |
| Number of Legs | 4 |
| Capacity Per Leg | 270 kg |
| Rated Weight Capacity with Legs | 1,125 kg |
12 mm thick Gray Cast Iron on top and 12 mm thick sides, additional reinforcement ribs underneath. Machined flat on all 5 sides to within +/- 0.0635 mm per 600x600 mm area. Side apron on the tables are 100 mm tall with 1 row of holes.
Dragon Scale Coating - Corrosion, spatter &scratch resistant
Connect Your Tables Together
Connect any number of tables together by using tacking bolts along with spacers.
Counterbore Underside
Chamfer on top and bottom
Dragon Scale Coating
Optional Accessories
What Comes With The Workstation Kit?
Slag Tray Assembly
- Sweep the material through without removing the tray and dumping it.
- Slide out slag tray & 2 drawer.
Shelf Assembly
- Reversible shelves
- Comes with a set of 2 shelves
Foot Tray Assembly
Handle Assembly
- Attached to the legs
Also Coming Soon
Modular Accessory Legs
Modular system that allows for a huge variety of accessory customization. Add shelves seats, leg braces, slag tray and more.
Distance between legs:
Long Side: 673 mm
Short Side: 343 mm
Bolts are to be installed parallel to the short side.
Adjustable Height Leg
Leg Height: 530 - 780 mm
Table Surface Height: 635 - 890 mm
Static Load Capacity: 544 kg
Outer Tube Outside Diameter: 83 mm, 5 mm Thickness
Inner Tube Otuside Diameter: 69 mm, 3.8 mm Thickness
Adjustable Leg + Caster
Leg Height: 650 - 900 mm
Table Surface Height: 760 - 1,000 mm
Static Load Capacity: 340 kg
Outer Tube Outside Diameter: 83 mm, 5 mm Thickness
Inner Tube Otuside Diameter: 69 mm, 3.8 mm Thickness
How does the FM19 system compare to other Table Systems?
FM19 - Ø19 mm
- 50 mm Grid Pattern
- 19 mm Diameter Hole
FM16 - Ø16 mm
- 50 mm Grid Pattern
- 16 mm Diameter Hole
FM28 - Ø28 mm
- 100 mm Grid Pattern
- 28 mm Diameter Hole
Fixturing System
The Fireball Tool fixture system is superior to others on the market. It features blocks that can be used in many different ways to maximize their usage. It also can be incrementally adjusted to ensure maximum coverage as efficiently as possible while others fail to reach certain distances without a complicated fixture.
FM19 - Ø19 mm
FM16 - Ø16 mm
FM28 - Ø28 mm
Videos
How To Install Legs on a Dragon Wagon
This is how to install legs on a Dragon Wagon. Remember, it is heavy so try to get a friend to help you.
Step 1: Stand the table up on its side (You can use a clamp in one of the side holes in order to get a grip).
Step 2: Brace the table so it does not tip over.
Step 3: Put the legs on horizontally, starting from the bottom legs (make sure the holes line up on each leg across from one another). Torque the bolts to 40.67Nm.
Step 4: Stand the table up now that all legs are on. Remember, the table weighs upwards of 90 kg - 180 kg depending on the size, so be very careful (this is where your friend can help).