Speed squares and machinist squares are made for visual inspection and checking AFTER setup, the Monster Square is designed to get those parts square in the first place.
The machined squares and tabs always create the perfect plane for your work-pieces to rest on. Bonus: The tabs also let you easily hold round tubing.
Clamping is simple with multiple surfaces for quick and rigid attachment
Stop spending your time and focus figuring out clamping strategies, or worse, clamping your straight work-piece to crooked surfaces.
| Size (mm) | Aluminum (AL) | Cast Iron (FE) | Flange (mm) | |
| Monster 300 | 300 x 300 x 76 | 3.6 kg | 10.5 kg | 76 |
| Monster 200 | 200 x 200 x 38 | 1.1 kg | 3.1 kg | 38 |
| Monster 150 | 150 x 150 x 38 | 0.5 kg | 1.4 kg | 38 |
| Monster 100 | 100 x 100 x 38 | 0.3 kg | 0.9 kg | 38 |
| Aluminum (AL) | Cast Iron (FE) | Dragon Scale (FE) |
| Pros
Cons
| Pros
Cons
| Fireball’s new Dragon Scale coating provides the corrosion resistance of our previous black oxide finish with the added benefit of enhanced spatter resistance. It’s spatter resistance needs to be seen to believed; it out performs even the best weld spatter sprays without the use of any sprays. |
4 Edge Location Tabs
Our revolutionary tabs allow you to align your material up so that you don’t even need a welding table! Don’t spend thousands on a flat table, just use our squares! Tighten the tabs onto the front or back of your square and you can immediately get to work. Sure, there are different jigs out there, but can they line your material perfectly in seconds?
4 Tool-less Thumbscrews
Edge Alignment Pins
Install our edge alignment pins on any square to create a large, overhanging edge which can be used to index the square on a different plane. Depending on the square, this allows you to create edges which are 90 degrees (perpendicular), 45 degrees, parallel, and even 60 and 30 degrees from the edge.
