Fireball Table System je špičková kombinace stolu a svítidel, která se od konkurence odlišuje hned v několika ohledech.
Přehled stolních systémů FM19
Stoly
- Dvě třídy stolů s jedním systémem upevnění.
- Heavy Duty Tables s 25 mm silnými horními a bočními stěnami a 200 mm vysokými bočními stěnami.
- Standard Duty Tables s 12 mm silnými horními a bočními stěnami a 100 mm vysokými bočními stěnami.
- Oba systémy používají stejná svítidla, která jsou vzájemně 100% kompatibilní.
- Konstrukce: Je vyroben z jednodílných (monoblokových) obrobených odlitků, které nabízejí excellent flatness and rigidity without the distortion caused by welding or heat treating.
- Materiál: Je vyroben z šedé litiny, která má vynikající rozměrovou stabilitu, přirozenou odolnost proti rozstřiku svarů a netvoří otřepy při poškrábání.
Příslušenství
- Přesné a rychlé: Patentované příslušenství, které zjednodušují, zpřesňuje a zrychluje upínání více než jakýkoli jiný dostupný systém.
- Pevné a flexibilní: Žádný jiný systém na trhu nekombinuje pevnost ocelových profilů 2 × 1 s univerzálností 25mm středů otvorů.
- Nejlepší výkon, nejlepší hodnota: Naše příslušenství dokáže provést více nastavení s menším počtem součástí, což znamená nižší celkové náklady a méně práce s každým nastavením.
What Makes Fireball Tables The Best
The Fireball Table System is the only one that has Heavy Duty (25mm thick) and Standard Duty (12mm thick) tables which use the exact same fixture system.
If you decide to upgrade or expand from one table to another, the fixtures are 100% compatible with both heavy duty and standard duty tables.
Fireball Tables combine the strength of a 25mm thick top and sides panels used for heavy duty tables with the more finely spaced 50mm grid pattern you usually find on light to medium duty tables. Gray cast iron material naturally resists weld spatter, does not form burrs on the surface and resists deformation. Once it is machined flat, it stays flat.
Fireball 19 mm vs 16 mm tables
Compared to light and medium duty tables with 16mm holes, the Fireball table has the same hole spacing, but heavier duty 25mm thick fixtures and heavier duty 25mm thick tables.
Fireball 19 mm vs 28 mm tables
The Fireball table has 2x the number of holes versus 28mm tables. The 100mm spacing on 28mm tables means a lot of compromises are made when using their fixture systems like holding parts with a single bolt, which makes them easy to knock loose or rotate.
At the same time, Fireball fixtures have the same material thickness as 28mm fixtures, but have more holes and adjustability.
Fireball 19 mm System
- 50 mm Grid
- 19 mm Hole
- Compared to 28 mm, double the number of holes on table top
- Compared to 16 mm, 45% Larger Cross Section, double the material thickness
Heavy Duty
Standard Duty
Heavy Duty Tables (25 mm Thick)
| Tabletop Dimensions | 2600 x 1400 mm |
|
Table Side Height |
200 mm |
|
Table Thickness |
25 mm |
|
Hole Diameter |
19 mm |
|
Grid Pattern |
50 mm |
|
Material |
Grey Cast Iron |
|
Finish |
None |
|
Tabletop Weight |
- |
|
Shipping Weight |
1,260 kg |
|
Leg Type |
Heavy Duty |
|
Number of Legs |
6 |
|
Capacity Per Leg |
- |
|
Rated Weight Capacity with Legs |
- |
| Tabletop Dimensions | 2000 x 1400 mm |
|
Table Side Height |
200 mm |
|
Table Thickness |
25 mm |
|
Hole Diameter |
19 mm |
|
Grid Pattern |
50 mm |
|
Material |
Grey Cast Iron |
|
Finish |
None |
|
Tabletop Weight |
- |
|
Shipping Weight |
925 kg |
|
Leg Type |
Heavy Duty |
|
Number of Legs |
6 |
|
Capacity Per Leg |
- |
|
Rated Weight Capacity with Legs |
- |
| Tabletop Dimensions | 1400 x 1400 mm |
|
Table Side Height |
200 mm |
|
Table Thickness |
25 mm |
|
Hole Diameter |
19 mm |
|
Grid Pattern |
50 mm |
|
Material |
Grey Cast Iron |
|
Finish |
None |
|
Tabletop Weight |
- |
|
Shipping Weight |
705 kg |
|
Leg Type |
Heavy Duty |
|
Number of Legs |
6 |
|
Capacity Per Leg |
- |
|
Rated Weight Capacity with Legs |
- |
Standard Duty Tables (12 mm Thick)
| Tabletop Dimensions | 1350 x 750 mm |
|
Table Side Height |
100 mm |
|
Table Thickness |
12 mm |
|
Hole Diameter |
19 mm |
|
Grid Pattern |
50 mm |
|
Material |
Grey Cast Iron |
|
Finish |
Dragon Scale |
|
Tabletop Weight |
- |
|
Shipping Weight |
180 kg |
|
Leg Type |
Standard Duty |
|
Number of Legs |
4 |
|
Capacity Per Leg |
270 kg |
|
Rated Weight Capacity with Legs |
1,125 kg |
| Tabletop Dimensions | 1000 x 600 mm |
|
Table Side Height |
100 mm |
|
Table Thickness |
12 mm |
|
Hole Diameter |
19 mm |
|
Grid Pattern |
50 mm |
|
Material |
Grey Cast Iron |
|
Finish |
Dragon Scale |
|
Tabletop Weight |
- |
|
Shipping Weight |
120 kg |
|
Leg Type |
Standard Duty |
|
Number of Legs |
4 |
|
Capacity Per Leg |
270 kg |
|
Rated Weight Capacity with Legs |
680 kg |
Fireball Fixture System
The patent pending Fireball Fixture System brings many features never seen in other welding fixture systems:
The fence block system is fast, accurate, and easy to use
- Quickly create a variety of shapes and configurations.
- Easily adjust gaps for weld accessibility.
- Use shims to quickly create custom distances.
All of the blocks used are the 100x50x25 mm Fence Block
Tooth block system is accurate, secure, and modular