Metric (mm):
9 pc: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10

Imperial (inch):
13 pc: .05, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8

The Fireball Tool Scraper consists of a cast iron handle combined with a hardened tool steel blade. Besides being the best scraper you’ll ever use, it’s also a great chipping hammer and edge deburring tool great for cleaning plasma or flame cut edges.

• Size: 150x150x38 mm
• Flange: 38 mm

• Size: 100x100x38 mm
• Flange: 38 mm

• Size: 150x150x38 mm
• Flange: 38 mm

• Size: 100x100x38 mm
• Flange: 38 mm

These are the locking pliers I've always wanted. Instead of traditional designs with two medium size arms, we have one big arm and one small arm.

What's special about this bench vise:

• 4 point swivel base designed to match up with holes on most common welding tables
• If you have a table with 16 mm holes, and the spacing is on 50 mm centers this vise will fit.
• Quickly bolt and unbolt the vise anywhere on the table as needed.
• When mounted in the correct orientation, the back jaw will hang over the edge of the table, allowing you to clamp tall objects in the vise.

Other great features:

• This vise is made from forged steel rather than cast iron, which has a higher yield strength for a comparable size.
• The 90,000 PSI tensile strength of these forgings allow the vise to be lightweight but with a comparable strength to vises with twice the weight.
• Since it's welded together, if you ever take things a little too far with a cheater bar you can repair it relatively easily.