Magnetic Shop Shims
Set of 28 Shop Shims with storage case now in mm sizes.
Each shim is ground on 6 sides with two magnets on the bottom face, there are 7 different heights and 4 pieces of each height in a set. These shims have countless uses around the shop and also in combination with our squares.
The thinner shims have smaller magnets which reduce the amount of force required to remove them.
The shims are ground on all 6 sides to an accuracy of +/- 0.03 mm.
Shims are hardened to HRC 50.
Just remember, to properly measure these you need to use a micrometer mounted on a stand and with the shim wiped clean. A pair of calipers in the hand with a dirty shim will not get an accurate measurement.
Each set includes:
Pieces in Kit
Tolerance +/- 0.03 mm